3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

EP1319 Crystal Clear Casting Epoxy Resin





EP1319 is an extremely clear casting epoxy for sealing, encapsulating and beautifying most surfaces.  EP1319 will cure to a clear, smooth, high-gloss finish.  EP1319 will waterproof and provide protection against environmental exposure, cleaners and most solvents.  EP1319 exhibits excellent impact resistance and adheres to most surfaces including concrete, metal, wood and fiberglass.  EP1319 is tintable by using Eager Polymers EP7701 transparent dyes, INSTINT color dispersions,  EP7702 opaque pigments and other special effects pigments.


EP1319 is widely used in zoological and marine environments, amusements parks, dioramas, modeling, bar tops, live-edge tables and industrial applications such as flooring.  EP1319 is 100% solids containing no solvents.


Properties & Technical Data                                                            Advantages

Pot Life @ 72F (100 gms)                    45 min.                                 Ultra Clear

Thin Film Set-Time @ 72F                    10 hrs.                                 No VOC’s or Solvents

Compressive ASTM D-695             12,650 psi                                  UV Resistant

Compression Modulus                   425,000 psi

Tensile Strength  ASTM D-638         7,500 psi

Flexural Strength                              12,300 psi

Elongation ASTM D-638                   4.3% min.

Mix Ratio by Vol.                                   2A:1B

Mixed Viscosity                                    750 cps

Color Mixed                                              Clear


EP1319 should not be poured thinner than ¼” thick.  All applications and dimensions vary, therefore testing should be done to determine maximum thickness that should be poured.


For marine environments with aquatic life contact, allow 5 – 7 days full cure at 77F before covering with water.  For table & bar top applications allow 5 – 7 days full cure before placing items onto the surface. 


Please consult the MSDS before using for all safety precautions.