General Description: EP-36XXX is a low odor, room temperature
cured, rigid, unfilled system with a very low viscosity. Applications include
anatomical & architectural models, trophy & lamp bases, plaques, wood
replicas, models, displays and much more. Due to the low viscosity of EP-36XXX,
exact duplication is achieved with exceptionally low shrinkage.
Mix equal parts by volume for 15-30
seconds and pour. Be sure that working
temperatures are at room temperature (72°F). Cooler or hotter temperatures can cause
inadequate results.
Mix
ratio, by volume 1R:1A
Pot
life 2
1/2 min at 72°F
Demold
time 4
-6 min at 72°F
Cured
Color Light
tan
Viscosity,
mixed 100
cps
Hardness 70D
EP36-XXX is available in the following sizes:
2
Pint Kit 2
lb
2
Quart Kit 4 lb
2
Gallon Kit 16 lb
10
Gallon Kit 80 lb
2
Drum Kit (110 Gallon) 950 lb
The expected shelf life of EP-36XXX is six
months. The information contained herein is based upon information and tests
which we believe are reliable. However, all information and recommendations are
made without warranty or guarantee since the conditions and methods of
commercial use are beyond our control. The user must make his own evaluation of
satisfactory performance in his particular application before
commercialization.
Warning: This product may cause respiratory or skin
irritation with possible sensitization. Use only with adequate ventilation. If
skin contact occurs, wash thoroughly with soap and water. In case of eye
contact, flood with water and call a physician. Use of gloves and face shield
is recommended. This product should not
be used near food or where prolonged skin contact may occur.
Disclaimer: This information is based on sources that we
believe to be accurate. It is offered in good faith, but without guarantee,
since conditions of use are beyond control. All risk of use are assumed by the user.
