| Product | Notes | Hardness | Mix | Pot | Demold | Mixed | Cured | Tensile |
| Name | Ratio | Life | Time | Viscosity | Color | Strength | ||
| [by Weight] | [psi] | |||||||
| Tin-Catalysed (Condensation Cure) Silicones | ||||||||
| *RTV325 | Use to 600 F. Fast-Cure System | 55 A | 10:1 | 6 min | 3 h | 120,000 cps | white | 550 |
| *RTV1000 | MOST POPULAR. For Fine Details | 32 A | 10:1 | 60 min | 18 h | 30,000 cps | blue | 775 |
| *RTV1032 | Use to 350F | 36 A | 10:1 | 60 min | 18 h | 45,000 cps | green | 525 |
| *RTV1040 | Use to 350F | 42 A | 10:1 | 60 min | 18 h | 55,000 cps | blue | 525 |
| RTV1110 | Extremely Soft | 10 A | 10:1 | 60 min | 18 h | 15,000 cps | blue | 275 |
| RTV245 | Tintable & Extremely Soft | < 2 A | 10:1 | 60-90 min | 18 h | 70,000 cps | clear | 230 |
| OOMOO 30 | Smooth-On. Convenient Mix Ratio | 35 A | 1:1 (Vol) | 30 min | 6 h | 4,250 cps | lavendar | 185 |
| *Mold Max 30 | Smooth-On, Good Strength | 30 A | 10:1 | 45 min | 24 h | 25,000 cps | blue | 400 |
| Platinum-Catalysed (Addition Cure) Silicones | ||||||||
| *P50 | Use to 650 F (Cast Pewter, Lead) | 54 A | 10:1 | 60 min | 24 h | 80,000 cps | green | 700 |
| *P90 | For casting polyester. Use to 600F | 35 A | 10:1 | 60 min | 24 h | 45,000 cps | pink | 600 |
| P4 | Clear. Low Viscosity. Use to 675F | 41 A | 10:1 | 60 min | 24 h | 5,000 cps | clear | 700 |
| P15 | Very soft. For delicate figurine casting. | 18 A | 10:1 | 60 min | 24 h | 20,000 cps | red | 475 |
| P45 | Use -60 to 600F | 45 A | 10:1 | 60 min | 24 h | 45,000 cps | brown | 800 |
| P60 | Use -60 to 650F | 62 A | 10:1 | 60 min | 24 h | 110,000 cps | blue | 900 |
| Dragon Skin | Very soft. Very strong. Very stretchy | 10 A | 1:1 (Vol) | 20 min | 5 h | 23,000 cps | clear | 475 |
| Dragon Skin Q | Very soft. Very strong. Very stretchy | 10 A | 1:1 (Vol) | 8 min | 75 min | 23,000 cps | clear | 475 |
| Silicone System Additives | ||||||||
| *RTV Diluent | Decrease viscosity of mixed silicone. Makes system more pourable. | |||||||
| *Ultra Fast Catalyst | Decrease cure time of mold to 20 min | |||||||
| *RTV Accelerator | Decrease cure time of mold to 5 min | |||||||
| *Red Catalyst | Gives longer library life of cured mold | |||||||
| *RTV Primer | Application helps silicone adhere to porous surfaces such as wood metals | |||||||
| *Pigments & Dyes | Various silicone-compatible concentrates to color your system | |||||||
| Platinum Accelerator | Used to speed-up cure of platinum-based systems | |||||||
| *Denotes Stock Item | ||||||||
| A wide range of other silicones is available through the manufacturer. Call for your special requirements! | ||||||||